Olympus Fe-370 Instruction Manual page 38

ting
Multi-connector
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
,....---- g
button
3
Press the
J1
button to start printing.
4
To print another image, use
~
@
to select an image, and press the
J1
button.
2
Turn on the printer, and then
connect the printer and camera.
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To find out if your printer supports PictBridge,
refer to the printer's instruction manual.
'1
PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
• The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer's instruction
manual.
• For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer's instruction manual.
1
Display the image to be printed on
the monitor.
• "Viewing images" (p. 16)
• Printing can also be started when the
camera is turned off. After performing Step
2, use
<1i>®
to select [EASY PRINT],
press the
@
button. Use
~@
to select an
image, and proceed to Step 3.
Printing images
at
the
printe"'s standard settings
>/y"Lgl:!ti£aLf:lrDwoN1MMiPMYiMlif1X2WiJMJ/@(MiAt-1&lf.@JT@};'JH!J2
EN