Table of Contents
Advertisement
INSTALLATION
CAST DOOR REVERSAL
1) The door can be reversed - so that it will open to the left. Make sure stove
has cooled to room temperature. Open the door to about 45°- then remove
it from the hinge by lifting up and out. Note: Door is heavy.
2) Remove the 2 bolts securing the door hinge to the unit.
Note: Once hinge is removed - reinstall the bolts and ensure they are tight
to prevent air leakage.
3) Remove the 2 bolts securing the door catch assembly to the unit.
Door
Catch
4) Flip the door hinge 180° - install on the left side of the unit with 2 bolts.
5) Reattach the door catch assembly on the right side with 2 bolts from step
3.
Door
Hinge
20
(LEFT TO RIGHT SIDE OPENING)
6) Remove the glass from the door and fl ip it around 180° - so the painted
strip is at the bottom of the door.
7) Flip the handle around 180° and reattach to the door with 2 botls.
Door
Hinge
8) Remove door pins (2) from back side of door by removing 4 bolts. reinstall
on other side of door by rotating 180° and reinstalling door pins.
9) Reattach the door to the door hinge.
Door
Catch
Regency CS2400 Freestanding Wood Stove
Advertisement
Table of Contents
