Table of Contents
Advertisement
Brick Installation
Firebrick is included to extend the life of your stove and radiate heat more
evenly. Check to see that all firebricks are in their correct positions and have
not become misaligned during shipping.
The "AD" brick in the drawings above is the brick covering the Ash Dump
hole that is used when the Ash Drawer Kit is installed (refer to the Listed
Components for Mobile Home Installation section).
Removing Wooden
Handle
1. To remove the wooden door handle from unit, firstly locate 7/64" Allen key
hole at the bottom of wooden handle.
2. Unscrew 7/64" Allen Key screw counterclockwise. Once the screw is com-
pletely loose, remove and drop the handle down off the door handle shaft
and replace with new handle.
F2500 Regency Freestanding Woodstove
Glass Installation
Your Regency stove is supplied with 5 mm Neoceram ceramic glass that will
withstand the highest heat that your unit will produce. In the event that you
break your glass by impact, purchase your replacement from an authorized
Regency dealer only.
Remove the door from the stove and remove the screws securing the glass
retainer. Position the glass in the door, make sure that the glass gasketing will
properly seal your unit, and replace the retainer, it should rest on the gasket
not the glass. Tighten securely, but do not wrench down on the glass as this
may cause the glass to break.
installation
19
Hide quick links:
Advertisement
Table of Contents
