Outgoing Messages; Record Your Own Outgoing Message; Check Or Delete Your Outgoing Message - BT Verve 450 User Manual

Outgoing messages

The outgoing message is the message a caller fir st hears when
the answering machine picks up their call. Ther e are 2 pre-
recorded outgoing messages to choose from (see note left) or
you can record your own.

Record your own outgoing message

1. Press . Scroll t
Menu
2. Scroll t o
Outgoing msg
3. is highlighted. Press
Record message
4. Scroll t o
Ans & Rec
5. Speak your announcement after the long beep. Press
stop recording.
6. Your message is then played back. If you want t o delete it,
press during playback. Or press
Delete

Check or delete your outgoing message

1. Press . Scroll t
Menu
2. Scroll t o
Outgoing msg
3. Scroll t o
Play message
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
o . Press
Answer machine
and press .
OK
.
OK
or and press
Answer only
to save.
OK
o . Press
Answer machine
and press .
OK
. Press .
OK
Answer and Record
The pre-set Answer and Record
outgoing message, that allows your
caller to leave a message, is "Hello,
your call cannot be taken at the
moment, so please leave your message
after the tone".
Your Answer and Record outgoing
message can be up to 1 minute long
.
and will replace the pre-recorded
OK
message.
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
.
OK
message, is "Hello, your call cannot be
taken at the moment and you cannot
to
Save
leave a message, so please call lat er".
When recording your Answer Only
message, remember to advise your
caller that they will not be able t o
leave a message.
Your own Answer Only message can be
up to 1 minute long and will replace
the pre-recorded message.
. To reinstate the pre-recorded
OK
messages, delete your own recorded
outgoing message, see opposite.
Answering machine 47