Pbx/Switchboard Access Code; System Pin - BT Verve 450 User Manual

36 Settings
If you enter your PBX access code your
BT Verve 450 will automatically enter a
pause after the first digit if it matches
the PBX access code.
If any existing code is displayed.
Press Clear to delete digits.
The System PIN is used when changing
certain settings and registration / de-
registration. The default setting is
0000. You can change this to your own
preferred 4-digit number.
If you make a mistake, press Clear to
delete digits.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

PBX/switchboard access code

1. Press , scroll t
Menu
2. Scroll t o
Base settings
3. Scroll t o
PBX access
4. Enter the code you want, then pr ess
5. Press to return to the previous menu level.
Back

System PIN

1. Press , scroll t
Menu
2. Scroll t o
Base settings
3. Scroll t o
System PIN
4. Enter the old PIN (original setting 0000) and pr ess
5. Enter the new PIN and press
6. Re-enter the new PIN and press
7. Press to return to the previous menu level.
Back
o and press
Settings
. Press .
OK
. Press .
OK
.
OK
o and press
Settings
. Press .
OK
. Press .
OK
.
OK
.
OK
.
OK
.
OK
.
OK