Outgoing Messages; Answer And Record; Answer Only - BT Freelance XD7500 User Manual

42 Answering machine
If you have not already set the date
and time, you will need to do this so
that you will know when each message
was received, see pages 8-9.
Call Screening
When a caller is leaving a message
SCREENING? appears on the display.
Pressing OK allows you to monitor the
message being left without the caller
hearing you.
You can then press
or to stop monitoring.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
3. Press
to confirm
4. Press and hold

Outgoing messages

This is the message your caller hears when the answering
machine picks up their call. Your BT Freelance XD7500 comes
to accept the call
with two pre-recorded outgoing messages to choose from.
You can also record your own outgoing messages.

Answer and Record

This allows your caller to leave a message for you. The pre-
recorded message is "Hello, your call cannot be taken at the
moment, so please leave your message after the tone."

Answer Only

This does not allow your caller to leave a message.
The pre-recorded message is "Hello, your call cannot be taken
at the moment, and you cannot leave a message, so please
call later."
or to select or
ON
to return to standby mode.
, then press
OFF OK