Connection; System - BenQ U101 Series User Manual

Connection

I cannot connect to the Internet with the built-in network
interface on my Joybook Lite. Why?
Check if the network has a fixed MAC address. Contact your
network administrator for further solutions.
When connecting to a local network, the connection is unstable.
Why?
The instructions below will guide you through the
troubleshooting process.
1. Right-click My Computer and select Properties >
Hardware > Device Manager.
2. Double-click Network adapters. When the name of the
network adapter of the Joybook Lite appears, double-click on
it.
3. The Properties window will pop up. Click the Advanced
tab, and then click the Speed & Duplex item on the left.
4. Select the appropriate mode according to the settings of your
LAN service from the Value drop-down menu on the right,
and then click OK.
• If the situation persists, press the <Fn> + <F10> hotkey
combination to disable WLAN to reduce interference of
different network connection modes.
I have a problem setting up wireless network.
Please follow the instructions below to resolve the problem:
50 FAQ and troubleshooting
• Have you enabled the WLAN function of the Joybook Lite?
Please press the <Fn> + <F10> hotkey combination to enable
WLAN.
• On Windows XP, click the Start button and select Control
Panel > Network and Internet Connection > Network
Connections. Double-click Wireless Network
Connections.
Make sure the connection status is connected and with
appropriate signal strength. If you do not see the connection
status, make sure your wireless device is set up correctly so
your Joybook Lite can receive the signal.
• Make sure your wireless router or access point is broadcasting
the SSID. Refer to your wireless device's documentation for
enabling this broadcasting feature.

System

How should I resolve the "Low on Disk Space" or "Out of Disk
Space" error messages on Windows XP?
Windows uses disk space for operations, such as caching and
virtual memory. The Joybook Lite may not run reliably if the
free space of the hard disk drops under 100MB or 200MB. The
following instructions will help you free up the disk space.
1. Click Start, and then click My Computer.
2. Right-click the hard disk icon and then select Properties.
3. Observe how much free space is on the hard disk.
4. To free up the space of your hard disk, click Disk Cleanup
and follow the on-screen instructions to proceed.