Installing Additional Memory - BenQ U101 Series User Manual

Installing additional memory

You can replace the existing memory module with a higher-
capacity one. Before you upgrade or replace memory, please
check on the BenQ web site to determine the module which can
be used, or contact BenQ distributor or customer service center.
It is recommended that you take your Joybook Lite to the BenQ
distributor or customer service center for the upgrade or
memory replacement.
For details about the limit of maximum memory, refer to the
product information from http://www.BenQ.com. Click
Products > Computing > Joybook, and then select your
purchased model. Click Specifications to find out the limit of
maximum memory.
To find out the types of BenQ certified memory modules for
your Joybook Lite, try the steps below:
1. Connect to BenQ Online Service and Support
(http://www.benq.com/support/).
Knowledge Base
2. Click
The website layout and content may vary by region/country.
• If you install an uncertified memory module, your system may
not work properly.
• It is the sole responsibility of the user if problems (such as
data loss and system failure) occurred due to non-factory
installed parts and/or non-original accessories.
.
1. Shut down your Joybook Lite completely. Disconnect the
power adapter and turn over your Joybook Lite.
2. Slide "Battery retainer" to the unlock
Battery retainer A
Battery
SSD
Memory
cover
position.
SSD
Installing additional memory 37