Advanced Menu; Security Menu; Boot Menu - BenQ U101 Series User Manual

Advanced menu

The Advanced menu contains advanced I/O (Input/Output)
configuration settings of the system.
• QuickBoot Mode: allows the system to skip certain tests
while booting.
• Legacy USB Support: allows the support of legacy USB
devices during system boot and under DOS.
• Frame buffer size: determines the memory size that can be
used by the Internal Graphics Device.
• Remote Power On: allows LAN to wake up the system from
Sleep mode.
If you are not familiar with the items in the
you are advised to keep the default.

Security menu

The Security menu contains the security settings, which
safeguard your system against unauthorized use.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
Lite warranty documentation. Should you happen to forget or
mislay the password once set, you will be greatly
inconvenienced in gaining subsequent access to your Joybook
Lite.
• Set Supervisor Password: This set of password controls
access to the whole BIOS setup menu. It must be set before
User Password can be set. When typing the password, first
make sure Num Lock is off, and then type your password in
the entry fields and press <Enter>. Confirm your password by
typing it again and pressing <Enter>.
• Set User Password: This set of password controls access to
part of the BIOS setup menu.
• Password on boot: This item determines if a password will
be prompted during system boot. When this item is enabled,
the password is always required to boot the computer.
Set Supervisor Password
If
both set, you can enter either one of them during the password
prompt. To have full privileges in BIOS setup, enter Supervisor
Password.

Boot menu

The Boot menu contains the boot configuration settings of the
system. A list of devices will be displayed under Boot priority
order.
• Use < > or < > to select a device, and then press <F6> to
Advanced
menu,
move it up or <F5> to move it down.
• To exclude or include a device in the "Boot priority order" list,
press the <x> key.
• To select a boot device manually, press the <F9> key when the
BenQ logo appears on the screen during system startup. The
Boot Menu will appear. Use the up and down arrow keys ( ,
) to select a boot device, and then press <Enter> to confirm.
Set User Password
and are
Using BIOS setup 35