Picture Optimization; Customizing The Hot Keys; Adjusting Display Mode - BenQ GW Series User Manual

Picture optimization

The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the
function. Go to
Adjustment
displayed image to the screen.
When you connect a digital input signal using a digital (DVI, HDMI, or DP) cable to your monitor, the
function will be disabled, because the monitor will automatically display the best image.
Adjustment
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor
when you use the
Auto Adjustment
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you
can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As
you run auto.exe, a test pattern displays.
2. Press any of the control keys to bring up the hot key menu. Select
menu.
3. Go to and
Display
4. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select
and adjust the monitor until the noise disappears.
Clock
5. If you notice a horizontal noise, select
disappears.

Customizing the hot keys

The top 3 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions
for these keys.
1. Press any of the control keys to bring up the hot key menu, and press
main menu.
2. Go to .
System
3. Select the custom key you want to change.
4. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.

Adjusting display mode

To display images of aspect ratio other than 16:9 and size other than the panel size of your
purchased model, you can adjust the display mode on the monitor.
1. Press any of the control keys to bring up the hot key menu, and press
main menu.
2. Go to
Picture Advanced
3. Select an appropriate display mode. The setting will take effect immediately.
and
Display Auto Adjustment
function.
.
Auto Adjustment
Phase
and
Display Mode
to optimize the currently
and adjust the monitor until the noise
.
Auto
Auto
to enter the main
Menu
Pixel
to access the
Menu
to access the
Menu
How to adjust your monitor 33