How To Set The Picture Optimization - BenQ FP72G+D User Manual

1 7
1 1

How to set the picture optimization

The easiest way to obtain an optimal display is to use the
optimize and adjust the screen settings automatically for you. Refer to
monitor for button locations and functionality.
If you wish to, you can always adjust the screen settings manually using the buttons on the
monitor panel. To assist you in this endeavour, BenQ has provided a screen test image utility
which you can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As you
run auto.exe, a test pattern displays.
2. Press the Enter key to access the monitor On-Screen Display (OSD) menu.
3. If you notice a vertical noise, press the
key. Then press the
press the or
4. If you notice a horizontal noise, press the
Enter key. Then press the
press the or
i
To make sure the key function performs well, you have to select one of the supported modes. If
i
the key does not work properly and the NON PRESET MODE message is on the OSD, it means
you are not using one of the supported modes. Please set your monitor to use one of the
supported modes as listed at the end of this manual.
or keys to select Pixel Clock and press the Enter key again. Then,
key to adjust the monitor until the noise disappears.
or keys to select Phase and press the Enter key again. Then,
keys to adjust the monitor until the noise disappears.
i
key function. Press the
or keys to select Geometry and press the Enter
or keys to select Geometry and press the
How to set the picture optimization
i
key to
How to adjust your
22