Picture Optimization - BenQ FP93G X+ User Manual

7. Picture optimization

The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the
function. Press the
When you connect a digital video output using a digital (DVI) cable to your monitor, the i key and the Auto
Adjustment function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the
monitor (1280 x 1024) when you use the i key function.
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you can
use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As you
run auto.exe, a test pattern displays.
i
2. Press the key on the monitor.
3. Press the ENTER key to access the monitor On-Screen Display (OSD) menu.
4. Use the or
5. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), press the
or keys to select Pixel Clock and press the ENTER key. Then press the
adjust the monitor until the noise disappears.
6. If you notice a horizontal noise, press the
key. Then press the
i
key to optimize the currently displayed image to the screen.
keys to select DISPLAY and press the ENTER key to enter the menu.
or keys adjust the monitor until the noise disappears.
or keys to select Phase and press the ENTER
i
key
or keys to
Picture optimization 19