Mute Microphone; Override; Paging - Pa; Paging - Direct - Mitel SX-200 Manual

Mute Microphone

To mute the microphone during a call:
• Press the Mute shortcut key (FCN + 5).
The other party cannot hear you speak.
Press the key again to re-enable the microphone.

Override

This feature allows a user who encounters a busy extension to enter the conversation.
To use Override when you encounter busy tone:
• Press the shortcut key for the Intrude feature. (See "Feature Programming" on page 4 for
information on programming a feature to a shortcut key.)

Paging - PA

To access the paging system to make an announcement:
1. Press
2. Do one of the following:
- To page the default zone, press the shortcut key for the PA Page feature; see "Feature
Programming" on page 4 for information on programming a feature to a shortcut key.
Or, dial the Paging Access to Default Zone feature access code.
- To page a specific zone, dial Paging Access To Specific Zones feature access code
followed by the zone number (0-9).
3. Make the announcement.

Paging - Direct

To page a user over the speaker in his or her telephone (requires that the user have Whisper
Announce or Off-Hook Voice Announce enabled):
1. Press
2. Press the shortcut key for the Direct Page feature. (See "Feature Programming" on page 4
for information on programming a feature to a shortcut key.)
3. Dial the extension number.
Note: SpectraLink Wireless Telephones cannot receive a Direct Page.
.
.
Additional Features
23