Start Menu; Move Hoop; Current Stitch Position; Bobbin Position - Husqvarna Viking Viking Topaz 40 User Manual

START MENU

Touch the Start Menu icon to open the toolbar. From the
toolbar in the Stitch-Out Mode you can only make changes in
the SET menu.

MOVE HOOP

Use the Move Hoop functions to move the embroidery arm
and hoop to different positions.

Current Stitch Position

When you want to return to the current stitch position and
continue embroidering where the embroidery was interrupted,
touch the Current Stitch Position icon. You can also press the
Start/Stop button once or press on the foot control to return
to the current stitch position and start to embroider.
Park Position
When you have finished your embroidery, remove the hoop
and select Park Position. The embroidery arm will be placed in
the correct position for storage.
Note: It is important that the hoop is removed before selecting Park
Position to prevent damage.

Bobbin Position

To make it easier to change the bobbin, touch Bobbin
Position. The hoop will move away from you, allowing you to
open the bobbin cover and replace the bobbin.
Trim Position
Trim Position will move the hoop towards you making it
easier to trim your jump stitches and trim fabric for specialty
techniques.
Note: You can also touch the Needle Stop Up/Down button on your
machine to move the hoop to trim position.

Center Position

Use the Center Position if you want to check where the center
position of the hoop is.
Start Menu
SET Menu
E
mbroidEry
S -o 8:3
titch ut