Corner Icons; Zoom Options/Pan - Husqvarna Viking Viking Topaz 40 User Manual

CORNER ICONS

Use the corner icons to set the locking point for Basic Design
Positioning in a corner of the design or at the center. This is
the easiest and most precise way since the connecting point
will be automatically placed exactly in the corner.
The corner icons may also be used when locking point is
selected. When touching one of the icons, the selected point
will automatically be set to the corresponding position, i.e. at a
corner or at the center of the embroidery.
E.g. when choosing the upper left corner icon, the connecting
point will be set at the upper left corner in the outer line of
the design(s). After this, you can continue and make your own
adjustments on the connecting point.
Trace the design field
The corner icons can also be used to trace the design field by
touching each of the four corner icons in turn. You can find
the center of the design again by touching the centering icon.

ZOOM OPTIONS/PAN

Touch the Zoom to Cursor icon to zoom in to the cursor
position as much as possible. You can position the locking and
matching point exactly where you want them.
Touch Zoom to Hoop to adjust the embroidery field to fit the
selected hoop.
Touch Zoom to All to show all the design(s) in the
embroidery.
Zoom to Box - Touch and drag your stylus in the embroidery
field on the screen to create a box. The screen zooms to show
that specific area.
Note: When you use the Zoom to Box function, the pan function is not
active.
Corner icons
Zoom to Cursor
Zoom to Hoop
Zoom to All
Zoom to Box
E S -o 8:7
mbroidEry titch ut