To Place A Call On Remote Hold - NEC DT300 Series User Manual

If Unanswered:
After preprogrammed time, Automatic Recall is
initiated.
Visual and audible signal (rapid flash and ring burst)
is sent to station that placed call on hold.
NOTE: Hold shows as a flashing green LED on your
phone. The same line on other phones shows as a
flashing red LED. Recall shows as a flashing green LED
on your phone and flashing red LED on other phones
with the same line.
To Place A Call On Exclusive Hold
Press Hold key twice. Line appearance indicates
interrupted wink.
EHD
4:26 PM TUE 12 FEB 2008
NOTE: If held line appears on other stations, LED
remains steadily lit red.
To Retrieve:
Lift handset or press Speaker key.
Press held line. Use handset to converse.
NOTE: Only phone that set Exclusive Hold option can
retrieve the call.
Held Station
Number
2001
If Unanswered:
After preprogrammed time, Automatic Recall is
initiated.
Visual and audible signal (rapid flash and ring burst)
is sent to station which placed call on Exclusive Hold.
Recall shows as a flashing green LED on your phone,
and solid red on other phones with same line.
NOTE: Exclusive Hold excludes any other phone from
picking up your held call. Exclusive Hold shows as a
flashing green LED on your phone. The same line on
other phones appears as a solid red LED.

To Place A Call On Remote Hold

To Initiate:
While in conversation with Station/Trunk Party
Press the Transfer key. Receive interrupted dial
tone
Dial destination station's extension.
Receive ring back tone.
Press the Hold key. (Call is placed on hold at the
destinations station's extension)
Hang up.
34