To Originate An Outside And Internal Call; To Originate A Call Using Speed Calling; To Place A Call On Hold - NEC Dterm Series I Quick Reference Manual

TO ORIGINATE AN OUTSIDE CALL
Lift handset or press
Dial the Central Office access code, e.g. 9.
Dial desired telephone number.
Use handset or MIC to converse.
TO ORIGINATE AN INTERNAL CALL
Lift handset or press
Receive dial tone.
Dial desired station number.
Display indicates digits dialed.
Use handset or MIC to converse.

TO ORIGINATE A CALL USING SPEED CALLING

(ONE-TOUCH BUTTONS)
Press desired Speed Call
To program:
(Available only on D-term stations with speed calling keys.)
Press Feature button.
Press desired Speed Call
Enter desired telephone number or feature code on the keypad. Display indicates digits dialed.
Press Feature again to save the number.
To verify:
Press Feature button.
Press desired Speed Dial
Display indicates digits programmed.
NOTE 1: To program a pause, press
LCD).
NOTE 2: To program a Voice Call, press
(V displays on LCD).

TO PLACE A CALL ON HOLD

Press Hold. Held line wink flashes.
NOTE: If held line appears on other D-term stations, the associated LED flashes red slowly.
To retrieve:
Lift handset or press
Press held line. Use handset to converse.
Speaker key, receive dial tone.
Speaker key.
button, or press Speaker
button.
button.
Recall key as any digit other than the first digit ( displays on
Transfer
Speaker.
and Speed Call.
key after dialing station number
2