Cid Call Display; Call Forwarding-All Calls - NEC DT300 Series User Manual

CID Call Display

To Display Calling Party Information:
Press CID key, CID lamp lights.
Calling Party Information is displayed.
To Redisplay Calling Party Information:
While on a call press CID key to recall the Calling
Party Information.
Calling Party Information is displayed.

Call Forwarding-All Calls

To Set
Press Speaker key. Receive dial tone.
Press FD-A key or dial Call Forward-All access
code. Receive special dial tone.
Dial destination station or outside telephone number.
Receive service set tone.
FD-A LED lights (at your station if FD-A key was
used).
Press Speaker key. Call Forwarding for all calls is
set.
FWD
4:26 PM TUE 12 FEB 2008
Forwarding
station
2000
To verify(with multi-line phone)
Press Speaker key. Receive extension dial tone.
Press FD-A key or dial Call Forward-All access code.
Display indicates the station number calls are
forwarded to.
FWD
4:26 PM TUE 12 FEB 2008
To Cancel
Press Speaker key. Receive dial tone.
CNCL
4:26 PM TUE 12 FEB 2008
Press FD-A key plus * or dial Call Forward-All cancel
code. Receive service set tone. LED goes out at
your station (or the phone of the sub line station).
Press Speaker key.
40
2000