Figure 2-17. Removing The Cpu Module - HP Pavilion ze5200 Service Manual

3. Turn the lock screw one-half turn counterclockwise to release the CPU module (you should hear a
light snap). Carefully lift the CPU module off of its socket on the motherboard.
Reassembly Notes
Caution
Each time you install a new CPU module, you must also replace the heat sink's thermal pad to
maintain optimum heat transfer. Use a sharp knife or scraper to carefully remove the old thermal
pad from the heat sink, then attach the new thermal pad.
•
The CPU module is keyed for installation, and can be inserted only one way.
•
Carefully insert the CPU module into the motherboard, and turn the lock screw one-half turn
clockwise to secure the CPU module.
•
Be sure to replace the thermal pad on the heatsink, as described in the reassembly notes on
page 2-27.
Service Manual

Figure 2-17. Removing the CPU Module

IMPORTANT: See th
Caution on the nex
page before
reinstalling the CPU
module!
Removal and Replacement
e
t
2-29