Connectors For Fpc Board - Canon Ixy Digital 90 Service Manual

1.4 Connectors for FPC Board

This product uses four types of connectors for the FPC board.
1 Type A
2 Type B
3 Type C
UNLOCK
4 Type D
CAUTION:
1. For the connectors of Type C, make sure to set them to the unlocked state before removing and inserting the
FPC board. After the FPC board is inserted, set them to the locked state.
2. The FPC board is equipped with holes as shown. Use them for removal and insertion by inserting the tweezers
into them as required.
The contact-piece
should face
upwards
Unconnected state
The contact-piece
should face
UNLOCK
downwards
Unlocked state
The contact-piece
should face
upwards
Unlocked state
Unconnected state
Fig. 2 Connectors for FPC board
Fig. 3 Holes for removal
2
Connected state
LOCK
Locked state
LOCK
Locked state
Connected state
Holes