Approx. 230,000 Pixels - Canon Ixy Digital 90 Service Manual

LCD Monitor
Type
Effective Pixels
Display Size
Picture Coverage
Brightness Adjustment
Quick-bright LCD
Variangle
Focus Control
AF System
AF Mode
Manual Focus
AF Frame
AF Lock
AF-assist Beam
Exposure Control
Metering System
Manual Exposure
AE Lock
Exposure Compensation
(Still images)
Exposure Shift (Movies)
Program Shift
Safety Shift
ISO Speed
(Standard Output Sensitivity,
Recommended Exposure Index)
Auto ISO Shift
ND Filter (built-in) Insertion
White Balance
Modes
Low-temperature polycrystalline silicon TFT color

Approx. 230,000 pixels

IXY DIGITAL 90: 75.0 mm diagonal (3.0-inch type), with wide viewing angle
IXY DIGITAL 10: 63.3 mm diagonal (2.5-inch type), with wide viewing angle
100%
15 levels
Available
Not available
TTL autofocus
Single
Not available
*1
AiAF (Face Detect /9-point) / AF (1-point
*1
If no face is detected, 9 points are used.
*2
Fixed to center
Available
• Shooting standby only in movie mode.
Available
*1
Evaluative , Center-weighted average, Spot
*1
Control to incorporate facial brightness in Face Detect AF.
*2
Fixed to center
Not available
Available
• Shooting standby only in movie mode.
±2 stops in 1/3-stop increments
±2 stops in 1/3-stop increments
• Shooting standby only.
Not available
Not available
*1 *2
Auto , High ISO Auto , ISO 80/100/200/400/800/1600
*1
Camera automatically sets the optimal speed according to subject brightness.
*2
Camera automatically sets the optimal speed according to subject brightness. However,
the ISO speed is set relatively higher than Auto (maximum ISO speed is ISO 800.)
Available
Not available
Auto, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H, Custom
12
*2
)
*2