D Pcb, Cf Fpc And Right Cover - Canon EOS D60 Service Manual

Part 3: Repair Information

2.7 D PCB, CF FPC and Right Cover

(1) D PCB
1. Remove the soldering from the flexible connector and shield plate.
2. Remove the flexible board from the connectors CN5001 on the A PCB and the
connectors CN2, 7 and 8 on the D PCB.
3. Remove four screws.
4. Remove the connector CN1 (B to B) and remove the D PCB.
NOTE 1 : Assembling
1. The connector "B" of DA32 FPC must be inserted between the screw and the D
PCB.
(2) CF FPC unit
1. Remove four screws and remove the CF FPC unit.
(3) Right cover
1. Unsolder three points on the flexible connector.
2. Remove two screws.
3. Remove the right cover.
NOTE 2,3 : Assembling
3. Align the position of the shaft of the CF cover with the line and attach the CF
cover from the lower flexible connector retainer. Then, fasten the screw.
4. Overlap the two upper flexible connectors, then attach them.
3-12