Others; How To Use The Adjustment Software - Canon Ixy Digital 90 Service Manual

3.7 How to Use the Adjustment Software

Start-up of Camera Watch
This camera requires Camera Watch for the communication with PC. Start up Camera Watch by selecting
Start > Program > Canon Utilities > Camera DCP connect > Camera Watch.
Mode change
This camera uses normally PTP for communication with PC. Because calibration and adjustment become impossible depending
on the condition of PTP, select the TWAIN mode of the PTP before starting calibration and adjustment.
• "FA" button: This button is used to change the mode from the USER mode to the FA mode.
(PTP to TWAIN)
* Before starting calibration and adjustment, be sure to set the FA mode.
• "USER" button: This button is used to change the mode from the FA mode to the USER mode.
(TWAIN to PTP)
* When calibration and adjustment are completed, be sure to change the mode to the USER mode before quitting the software.
Model Name Change <Select Model>
Model Name can be changed. Language, Date Style and Video Type are also changed to initial settings that are compatible with
Model Name.
* Be sure to change Model Name every time MAIN PCB ASS'Y is changed.
Adjustment Menu/Calibration
For starting, click the button related with calibration/adjustment.
* Whenever you use your light source for the adjustment for the first time, be sure to click the "Calibration" Button.
Quitting the Adjustment Software
Click the "Exit" button.
Camera Data Saving and Loading <Data Transfer>
• "Save" button : This button saves all adjustment data stored on the camera in text format.
• "Load" button : This button loads all adjustment data saved in text format to the camera.
Calibration Data Saving and Loading <Calibration>
• "Save" button : This button saves the calibration data.
• "Load" button : This button loads the saved calibration data to the adjustment software and reflects it.
Notes
• If the adjustment fails, a message indicating the failure will appear on each product. If this happens, do the adjustment
again.
• The Adjustment Software is dedicated only to Canon Digital Camera PowerShot SD750/1000 and DIGITAL IXUS 75/70.
Never use it for any other camera.
• The Windows2000 must be pre-installed on the computer that is equipped with the USB terminal.
* Operations on the other Operating Systems such as Windows95, 98, Windows XP and others are not guaranteed.
7