Eth Dot1X Port Config - THOMSON TG576 v7 Reference Manual

eth dot1x port config

Configure an existing PAE.
SYNTAX:
eth dot1x port config
where:
name
intf
mode
credentials
pctrl
mac
316
name = <{}>
[intf = <{}>]
[mode = <{Supplicant}>]
[credentials = <{}>]
[pctrl = <{Auto|ForceAuthorized|
ForceUnauthorized}>]
[mac = <hardware-address>]
Name of the port.
The link the port controls.
Authentication mode of the port.
Credentials to use.
Port control mode.
The MAC address of the peer.
eth Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20071119-0014 v2.0