Installing The Rm-B750; Connecting/Disconnecting The Flexible Card Wire - Sony HDCU-950 Installation And Maintenance Manual

1-9. Installing the RM-B750

1-9-1. Connecting/Disconnecting the
Flexible Card Wire
The flexible card wires are used to connect between the
following boards. Life of flexile card wire will be signifi-
cantly shortened if it is folded. Be very careful not to fold
the flexible card wire.
. One flexible card wire between the AU-281 board (CN2)
of the unit and the VA-211 board (CA2) of the RM-
B750 (when the RM-B750 is installed)
. One flexible card wire between the VA-211 board
(CN14) and MPU-124 board (CN104) of the RM-B750
Removal
1. Turn off the main power.
2. Slide the portion "A" in the direction of the arrow to
unlock and pull out the flexible card wire.
Installation
m
. Do not insert the flexible card wire sideways.
. Confirm that there is no stain or dust on the contact
surface of the flexible card wire.
1. Slide the portion "A" in the direction of the arrow and
securely insert the insulated surface (Blue) of the
flexible card wire into the connector in the direction
that is shown against the recessed portion of the
connector.
2. Return the portion "A" to its original position and lock
the connector.
HDCU-950 IMM
A
Type A
Connector
A
Recessed portion
Insulated surface (Blue)
Type B
1-9. Installing the RM-B750
Contact surface
A
Recessed portion
Connector
A
1-31 (E)