Connection Connectors; Note When Connecting Camera Connector - Sony HDCU-950 Installation And Maintenance Manual

1-4. Matching Connectors and Cables
INCOM (5-pin, Female)
5
4
_ _ _ _ _ EXT VIEW _ _ _ _ _
No. Signal
1 INCOM (T) IN (Y)
2 INCOM (T) IN (X)
3 INCOM (T) IN (G)
4 INCOM (R) OUT (X)
5 NC

1-4-2. Connection Connectors

When connecting cables to each connector of the connec-
tor panel during installation or service, connect the follow-
ing connectors or equivalent to the tip.
Connector
HDCU-950
CAMERA
(HDC-900/950/930 side)
CCU
HDCU-950
REFERENCE IN
PIX OUT
WF OUT
SYNC OUT
PROMPTER IN
HKCU-951
Y/G OUT
B-Y/B OUT
R-Y/R OUT
VBS OUT
HKCU-953
FRAME REFERENCE IN
FRAME REFERENCE OUT
1-6 (E)
1
2
3
(0 dBu = 0.775 Vrms)
Specifications
_20 dB
(CARBON MIC)
_40 dB
(ECM MIC)
_60 dB
(DYNAMIC MIC)
GND for INCOM
Max. 12 dBu
No connection
Connector/cable
LEMO®
PUW. 3K. 93C. TLCC96 *1
LEMO®
FUW. 3K. 93C. TLMC96 *1
1-569-370-12 PLUG, BNC
Connector
HDCU-950
RET IN (1-3)
SERIAL OUTPUT (1-2, MONI) equivalent
SD SDI OUT (1-3)
HKCU-953
HD SDI OUT (1-2)
MIC1/MIC2
(3-pin, Male)
MIC REMOTE
(WF REMTOE)
(D-sub 15-pin, Female)
INCOM/TALLY/PGM
(D-sub 25-pin, Female)
WF MODE
(4-pin, Female)
RCP/CNU
(8-pin, Female)
INCOM
(5-pin, Female)
*1 : Caution in making the optical/electric signal composite cable:
When making the optical/electric signal composite cable used for this
camera system, the connection connectors specified in this manual
must be used in order to comply with the limits for EMC regulations.
1-4-3. Note when Connecting CAMERA
Connector
Before connecting the unit to the camera adapter, clean the
following optical contact blocks.
For the cleaning procedure, refer to Section 3-1, "Cleaning
of Connector/Cable".
. CAMERA connector of the unit
. CCU connector of the camera adaptor side
. Optical/electric signal composite cable
Connector/cable
1-569-370-12 PLUG, BNC or
BELDEN8281 Cable or
1-508-083-00 XLR 3-pin female
or CANNON XLR-3-11C
equivalent
1-506-582-11 D-sub 15-pin, male
or JAE DA-CI-J10 equivalent
D-sub 25-pin, male
JAE DA-25PF-N equivalent
1-560-155-00 PLUG, 4-pin male
(supplied)
1-766-848-11 PLUG, 8-pin male
or CCA cable assembly (optional)
CCA-5-30 (30 m), CCA-5-10
(10 m), CCA-5-3 (3 m)
1-508-370-11 XLR 5-pin, male
or CANNON XLR-5-12C
equivalent
HDCU-950 IMM