Motorola MC55A0 User Manual page 152

B - 2 MC55A0/MC55N0 Enterprise Digital Assistant User Guide
MC55 Numeric Keypad Descriptions
Table B-1
Key
Blue Key
Orange Key
Talk/Start Menu
Scan (yellow)
End/OK
Use this key to launch applications or access items (shown on the keypad in blue).
Press the Blue key once to activate this mode, followed by another key.
A single press illuminates the key and displays the following icon at the bottom of the
screen, until a second key is pressed:
Use this key to access the secondary layer of characters and actions (shown on the
keypad in orange). Press the Orange key once to lock the keypad into Alpha state.
A single press illuminates the key and displays the following icon at the bottom of the
screen:
Press the Orange key a second time to return to the normal state.
Press the Orange key, then the Shift key to add a temporary shift (that applies only to
the next key pressed) to the orange lock state. This displays the following icon at the
bottom of the screen:
Use this key in conjunction with the Blue key to instantly display the Start menu from
any application without tapping the screen. This function is user programmable.
To use a key as an application key (APP key) on the keyboard, create and install a new
keyboard remap table. However, to remap the green phone key as APP keys through
the registry, create an XML provisioning file that includes the following entry:
<characteristic type="HKLM\Hardware\DeviceMap\KYBD">
<parm name="GreenKeyOverride" value="xx" datatype="integer" />
[where xx is the new APP key code]
Provision the file to the MC55 to send an APP key code, instead of the original key
code, upon pressing the green phone key. Refer to the MC55A0/MC55N0 Integrator
Guide for information on creating XML provisioning files.
Activates the scanner/imager in a scan enabled application.
Use this key in conjunction with the Blue key as an OK or close button. This function is
user programmable.
To use a key as an application key (APP key) on the keyboard, create and install a new
keyboard remap table. However, to remap the red phone keys as APP keys through
the registry, create an XML provisioning file that includes the following entry:
<characteristic type="HKLM\Hardware\DeviceMap\KYBD">
<parm name="RedKeyOverride" value="yy" datatype="integer" />
[where yy is the new APP key code]
Provision the file to the MC55 to send an APP key code, instead of the original key
code, upon pressing the red phone key. Refer to the MC55A0/MC55N0 Integrator
Guide for information on creating XML provisioning files.
Description