Motorola MC55A0 User Manual page 131

Troubleshooting the MC55 (Continued)
Table 6-1
Problem
MC55 shuts off.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the MC55
memory is full.
The Charging/Battery
Status LED flashes
with the Power button
is pressed and the
MC55 does not turn
on.
Cause
MC55 is inactive. The MC55 turns off after a period of inactivity. If the MC55 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the MC55 is running on external power,
set this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
>
Power
delay before the automatic shutoff feature activates.
Battery is depleted. Replace the battery.
Battery is not Insert the battery properly. See Installing the Battery on page
inserted properly. 1-5.
Screen is not Re-calibrate the screen. Press Blue key - Backspace key or
calibrated correctly.
tap
The system is not Warm boot the system. See Resetting the MC55 on page
responding. 2-19.
Too many files Delete unused memos and records. If necessary, save these
stored on the MC55. records on the host computer (or use an SD card for additional
memory).
Too many Remove user-installed applications on the MC55 to recover
applications
memory. Select
installed on the
Select the unused program and tap Remove.
MC55.
The MC55's battery Recharge the battery.
is low.
Maintenance & Troubleshooting
Solution
. Select and change the setting for a longer
Advanced
> Settings > System > Screen > Align Screen button.
> Settings > System Remove Programs.
6 - 7
> >
Settings System