FujiFilm FinePix4800Zoom Service Manual page 30

4. Adjustment and Inspection
<Step 2>
The repaired model is selected. (U/E/EG)
<Step 3>
When the U/E/G key is pressed the USB ID Write
Screen (Fig.29) appears. Enter A~R for the repair
center at which repairs were carried out.
<Step 4>
After the repair center is selected the USB ID Write Com-
pletion Screen (Fig.30) appears. Press the Enter key.
<Step 5> Important!
When the Enter key is pressed the FinePix
4800Zoom PC Adjustment Completion Screen
(Fig.31) appears. Remove the DC jack while en-
suring that the USB cable remains connected.
Terminate the adjustment software by selecting
PC adjustment software Operation ® Completion.
Remove the USB cable after the adjustment
software has been terminated.
30
FinePix4800Zoom(U/E/EG) SERVICE GUIDE
<Fig.29> USB ID Repair Center Write Screen
<Fig.30> USB ID Write Completion Screen
<Fig.31> FinePix 4800Zoom PC Adjustment Completion
Screen