FujiFilm FinePix4800Zoom Service Manual page 21

FinePix4800Zoom(U/E/EG) SERVICE GUIDE
<Step 4> (select file save location)
Select FD Symbol (Fig.L-(1)) from the EVR data
dialog. This displays the EVR File Select Screen
(Fig.M). Select the save location on the screen.
This example shows selection of Drive: A (floppy
disk) as the save location. Enter the file name for
the data and click on Save. This operation opens
the EVR Record dialogue (Fig.N).
<Step 5> (batch data read)
Select Write file (Fig.N-(1)) on the EVR Record
Dialog Screen, check page0~pageF (Fig.N-(4)),
and click on the Open button (Fig.N-(5)).
This operation opens Read Data From Specified
Page in Camera (adjustment data for
FinePix4800Zoom is located in page0~pageF).
* Modes in EVR Record Dialog
Item
Details
Write file
S a v e d a t a i n f l a s h
ROM to file
Write data saved in
Read file/
file to RAM (not writ-
WriteRAM
ten to ROM)
Read file/
Write data saved in
WriteROM file to ROM
<Step 6> (batch write (write to RAM))
Select the file saved in Step 5, check Read file/Write
RAM (Fig.N-(2)) on the EVR Record Dialog Screen,
and click on the Start button (Fig.N-(5)). A check as
shown in Fig.N-(4)) is unnecessary at this point. The
data in the file saved on the PC is automatically writ-
ten to RAM. The data written to RAM is displayed in
blue.
<Step 7> (batch write (write to ROM))
Select the file saved in Step 5, check Read file/Write
ROM (Fig.N-(3)) on the EVR Record Dialog Screen,
and click on the Start button (Fig.N-(5)). A check as
shown in Fig.N-(4)) is unnecessary at this point. The
data in the file saved on the PC is automatically written
to ROM. The data written to ROM is displayed in red.
Remarks
RAM, EVR data dis-
played in blue after
writing to RAM.
RAM, EVR data displayed in
red after writing to RAM.
4. Adjustment and Inspection
<Fig.L> EVR Data Dialog Screen
<Fig.M> File Save Location Select Screen
(1)
<Fig.N> EVR Record Dialog Screen
(1)
(2)
(3)
(4)
(5)
21