Basic Connection - EverFocus EDSR400H Instruction Manual

4.2 Basic Connections
Power
Connect the power source or adapter into the power socket.
Cameras
Connect each camera video input connector to the video output from a camera or other composite video source.
At least one camera must be connected before the system is running for the auto detection of video standard to
take effect.
Audio In/Out:
The camera audio In/output is connected to the audio input terminal at the rear panel.
Speaker
Connect the speaker or other audio devices.
Ethernet
Digital Video Recorder is enabled control form the PC via Ethernet. Connect the LAN connector to a standard
RJ45 connector
Ethernet cable.
RS232/RS485
Digital Video Recorder is enabled control from the PC via RS232/RS485
Main/Call Monitor
Connect the Main/Call monitor output connector to a Main/Call monitor. The Main/Call monitor displays
selected live or recorded cameras in any available format.