Basic Connection - EverFocus MoniVue System ESN41 Quick Installation Manual

2.3 Basic Connection

After installing the video recorder, you can start connecting the external devices to the system.
The instructions below describe the basic connection to the system.
The image below uses ESN41 FHD as an example.
1
SD Card
1. To record videos, connect a SDHC/SDXC card to the card slot (see 2.2 SD Card Installation).
2. To control the system, connect a mouse to the video recorder or use the supplied IR
Remote Control.
3. To manage the video recorder over network, use a standard RJ-45 cable to connect the
video recorder to the network.
Note: The ESN41 FHD features PoE function, you can also power the video recorder
through the PoE port by connecting to a PoE switch.
4. To power on the video recorder, connect the video recorder to power using the supplied
Power Adaptor (see 2.3.1 Power Input).
Note: The ESN41 FHD features PoE function, you can also power the video recorder
through the PoE port by connecting to a PoE switch.
5. Connect the audio and video devices to the video recorder using the supplied D-Sub Cable
(see 2.3.2 D-Sub Cable).
6. To view videos, connect a monitor to the VGA port using the supplied VGA Cable (see 2.3.3
Monitor Connection).
2 3
WAN
Mouse
NB / PC
CMS (Client PC)
9
MoniVue System – Video Recorder
4 5
D-Sub Cable
Power Adaptor
Audio Input / Output
6
Main Monitor (VGA)
Camera