Panasonic WV-NW484S Setup Manual page 72

Symptom
Images are displayed
blurry.
The image is not being
refreshed.
No image is displayed
(or too dark).
Images are displayed
washed out.
Flicker appears on the
screen.
Cause/solution
• Is there dust or dirt on the camera's dome?
Check if there is dust or dirt on the camera's dome.
• Is the camera's dome dirty?
Clean off any dirt from the camera's dome.
• Is the focus adjusted correctly?
If the camera gets out-of-focus during use, adjust the focus
by setting back focus (ABF).
• Depending on the type and version of your
browser, there might be difficulties refreshing the
picture and operating or controlling the camera.
We recommend using Microsoft
SP2.
®
When using Microsoft Windows
we recommend using Microsoft
• Depending on the network environment in use,
there might be difficulties displaying the picture.
Click the [Update] button of the browser to acquire the
latest picture.
• Is the brightness setting set at an appropriate
level?
Click the "0" [Brightness] button.
• Is the brightness setting set at an appropriate
level?
Click the "0" [Brightness] button.
• Is the shutter speed set to "AUTO"?
When flickering cannot be corrected with the shutter speed
set to "AUTO", set it to "1/100".
• Is "ON" selected for "Super Dynamic III"?
Set to "OFF".
72
® ®
Internet Explorer 6.0
®
2000 Professional SP4,
® ®
Internet Explorer 6.0.
Reference
pages
—
—
29
—
—
Operating
Manual
Operating
Manual
22
22