No.
Item
(3)
[Alarm output]
Default: CLOSE
OPEN
CLOSE
(4)
[Pulse width]
Default: 1 sec
Select whether to open or close the alarm output terminal when
outputting the alarm signals.
................................................................................................................
Note
• When "OPEN" is selected, the alarm signal will be output for about
20 seconds when the camera is turned on.
.....................................................................................................................
The alarm output terminal will open when outputting the alarm signals.
(Normally closed)
The alarm output terminal will close when outputting the alarm signals.
(Normally open)
When "Pulse" is selected for [Alarm output], select an alarm output
terminal duration from the following.
Available pulse width: 1 to 120 sec
39
Description
(2/2)