Panasonic WV-NW484S Setup Manual page 41

Network camera

Operating instructions manual (50 pages)

Operating manual (17 pages)

Specifications (2 pages)

Table of Contents

.........................................................................................................................................................................

Note

• Areas used for the time and date display of [OSD position] (→ page 9) cannot be used for the VMD areas.

• It is possible to display the alarm occurrence indication button (→ Operating Manual) for confirmation

when motion of an object is detected by the motion detector function. To display the alarm occurrence

indication button, select "ON" for [VMD alarm] on the [Alarm] tab.

• The alarm occurrence indication button will be displayed when an alarm input of a terminal alarm or a

command alarm is received.

• Depending on the network environment in use, notification may be delayed even when "Real time" is

selected for [Alarm status update mode] on the [Basic] tab of the "Basic setup" page (→ page 9).

..............................................................................................................................................................................

Important

• When it is necessary to set the electronic zoom, do so after setting the VMD area.

Areas used for the time and date display of "OSD

position"

Table of Contents