Panasonic WV-NW484S Setup Manual page 19

No. Item
*2
(9) [Multicast port]
Default: 37004
*2
(10) [Multicast TTL]
Default: 16
*1 Set this item when [Transmission type] is set to "Unicast port (MANUAL)".
*2 Set this item when [Transmission type] is set to "Multicast".
Enter the multicast port number (used to transmit images from the
camera).
Available port numbers: 1024 to 50000 (even numbers only)
Important
• Enter an unused port number as the multicast port number.
Enter the multicast TTL value.
Available value: 1 to 254
Important
• When MPEG-4 images cannot be transmitted via the Internet,
consult the network administrator.
• When displaying multicast images on a PC with multiple network
interface cards installed, deactivate cards that are not related to the
network to which the camera is connected.
19
Description
(3/3)