Panasonic WV-NW484S Setup Manual page 11

No. Item
(8) [Alarm status update
mode]
Default: Real time
Polling(30 sec)
Real time
(9) [Alarm status port]
Default: 31004
(10) [Automatic installation of
Viewer software]
Default: ON
ON
OFF
Select an interval at which the camera status is notified.
When the status of the camera changes, the alarm occurrence indication
button and the AUX button will be displayed in the "Live" page to notify
you of the camera status.
Important
• When using Microsoft Windows 2000 Professional SP4, the camera
will operate in the "Polling(30 sec)" mode even when "Real time" is
selected for "Alarm status update mode".
................................................................................................................
Note
• Depending on the network environment in use, notification may not
be performed in real time.
.....................................................................................................................
The camera status is updated and notified every 30 seconds.
The camera status is notified when the status has changed.
When "Real time" is selected for [Alarm status update mode], designate a
port number to which the status notification is to be sent.
Available port number: 1 to 65535
Determine whether or not to install the viewer software from this camera.
Important
• It is impossible to display images and to receive/transmit audio
between the camera and the PC when the viewer software "Network
Camera View3" is not installed on the PC.
• The number of the viewer software installations can be checked on
the [Upgrade] tab of the "Maintenance" page.
Installs the viewer software from the camera automatically.
The viewer software cannot be installed from the camera.
11
Description
(3/3)