Toshiba DP80F Operator's Manual page 53

Power Saver Operation - continued
5
Select the Printer Power Saver Function
Enable or Disable the Printer
Power Saver function.
(Example if the 12-hour format
(to set Printer Power Saver ON)
option is selected in DATE &
TIME setting)
When "OFF" is selected, the
"COMPLETED" message is dis-
(to set Printer Power Saver OFF)
played as shown at the bottom
in Step 6. Returns to Step 1.
If "ON" is selected, the currently
set time period is displayed be-
low. The time on the left is the
Printer Power Saver start time
(or time that the printer unit will
power down). The time on the
right is the Printer Power Saver
end time.
START/STOP TIME
[00:00-00:00]
(Example if the 24-hour format
option is selected in DATE &
TIME setting)
6
Enter the Start Time
and End Time
Move the cursor to the desired
START/STOP TIME
position, using the following
[12:00AM-12:00AM]
keys.
Enter the time period.
Change the AM/PM designation
if selected by pressing the fol-
lowing keys.
When the correct time period is
displayed, press:
COMPLETED
Displayed for 2 seconds
The display returns to Step 1.
7
Select Another
SETUP Item, or ...
After completing this Configura-
tion Setting, press
or
to exit the Configuration Setting
mode and return to the Standby
Mode.
or
51
51