Worcester 24CDi Instruction Manual page 11

Pre-set Program 3 (Home Worker)
24 hours
Event 1
Time 6:00 8:30 12:00 14:00 17:30 22:30
Temperature 21
As you can see, at 06:00, the heating will come on to
raise the temperature to 21°C.
At 08:30, the temperature set point is dropped to
19°C, it stays at 19°C until 12:00 when the heating
comes on to raise the temperature to 21°C. The tem-
perature stays at 21°C until 14:00 when it drops to
19°C. At 17:30 the heating comes on to raise the
temperature to 21°C where it stays until 22:30 when
the temperature drops down to a setback tempera-
ture of 16°C until 06:00 when the cycle repeats the
next day.
Option 03 How to change the number of pro-
gram events per day.
Enter user options, select option 03 and use + and –
keys to select option. 2 = 2 time / temp events per
day, 4 = 4 time / temp events per day and 6 = 6 time
/ temp events per day. Press > to accept change.
Option 04 How to switch on/off the automatic
summer / winter time change.
Twice a year the actual time is automatically changed
to keep it in line with the summer / winter time
change. Default setting is On.
If you wish to disable / enable this feature enter user
options, select option 04 and press – or + key to dis-
play Off or On as desired. Press > to accept change.
2 3 4 5
19 21 19 21
DIGISTAT PROGRAMMABLE 24 HOUR
ROOM THERMOSTAT SYSTEM
8 716 114 518a (09.07)
Date and time setting.
The DT10RF Programmer/Optimising Programmer
comes with a pre-set clock, which also automatically
adjusts for daylight saving time changes. It is activat-
6
ed automatically on 1st installation. There should be
no need to change these settings, however, should
you wish to, it can be done in Option 05.
16
Option 05 How to adjust date and time.
Enter user options,
select option 05
To change the year
press > once
To change the month
press > again
To change the day
press > again
To change the time
press > again
Once you have select-
ed your required dis-
play, to adjust press +
or - and > to accept
change.
To select option 06
press > until option
06 display is shown
OPERATING & INSTALLATION
INSTRUCTIONS
DIGISTAT
USER OPTIONS
7