Connection Ports - SATO CX400 Service Manual

SWITCHES & INDICATORS
Error Indicator

CONNECTION PORTS

Parallel Port
Serial Port
VAC Power Supply Port
SATO CX400 Service Manual
Not illuminated when the printer is operational.
Blinks when a malfunction has occured.
Switches and Indicators, Figure 1-2
Located on the left rear side of the printer. Permits PC
connection for advanced programming, control, and
operation.
Located on the right rear side of the printer. Converts the
serial port signal to/from the micro-controller to RS232
voltage level. Also permits PC connection for advanced
programming, control, and operation.
Located centrally on the rear of the printer. Permits the
connection of the voltage supply transformer.
PN 9001110A
Section 1: Introduction
Power Indicator
Error Indicator
Feed Button
Power Switch
DETAIL
Page 1-3