Printer Settings - Panasonic DP-2330 Operating Instructions Manual

■ Printer Settings

Screen
Modes
No.
00 Printer Settings Print
01 Job Completion Time
02 Page Protection
01/03
03 Error Page Print
04 Spool Function
05 Text Print
06 PS Configuration Print
07 Font List Print (PCL)
02/03
08 Font List Print (PS)
09 Mailbox Data Holding
10 Delete Mailbox Data
11 Print Queue Delete
03/03
12 AppleTalk Zone Name ∗∗∗
● The Key Operator ID Code is required before any changes can be made to items on this
NOTE
∗
∗∗
∗∗∗
Sets the printer status printout.
● Stop, Start
Sets the job completion time setting.
● 1~ 999 sec.
Compress automatically then printout.
● Off, On
Sets the error page printout.
● Off, On
Sets the spool function.
● Off, On
Prints text page only.
● Off, On
Sets the status page print of PS.
● Stop, Start
Sets the font list print of PCL.
● Stop, Start
Sets the font list of PS.
● Stop, Start
Sets the automatic holding function of mailbox
data. ∗
● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
7 days
Sets delete the mailbox data. ∗
● All, Before
Sets authorization to delete the print queue.
● Free, Key Op. (operator)
Inputs an AppleTalk Zone name. ∗∗
● Maximum 32 characters
page.
Functions 04, 09 and 10 are available when optional Hard Disk Drive (DA-HD30) is installed.
When function No. 12 is set or No. 4 is change, cycle the power by turning the Power Switch
on the Left Side of the machine OFF and ON.
When available with optional PS.
Function
Initial
Setting
Start
180
Off
On
On
On
Start
Start
Start
7 days
Before
Key Op.
65