Multi-Size Feeding; Job Build And Sadf Mode - Panasonic DP-2330 Operating Instructions Manual

Making Copies
2-Sided/Original

■ Multi-Size Feeding

Use this function when copying mixed Ledger/Letter
size originals using the ADF. Original size can be
detected automatically then can be copied full size
(1:1) or same size.
Combination of Multi-Size Feeding
Originals
Full Size
Legal Legal
Letter-R Letter-R
Ledger Ledger
Letter Letter

■ Job Build and SADF Mode

Special originals (like thin paper, etc.) can be fed
from the ADF Tray and copied continuously using
the Job Build and SADF Mode.
Example: To make 5 sets of sorted copies of
80 sheets of originals. (Letter size)
50
1
Originals: 50 sheets
<1st scan>
80
51
1 and 2
st
are combined into one job.
Originals: Remaining 30 sheets
<2nd scan>
● Multi-Size Feeding Function cannot be combined with another 2-sided/original
NOTE
● Job Build and SADF function cannot be combined with 2
● Optional Image Memory or Hard Disk Drive (DA-HD30) may be required.
38
Copies
Reduction Enlargement
Letter-R/Invoice Ledger
Letter-R/Invoice Ledger
Letter/Letter-R
—
Letter/Letter-R
80
1
5 sets of 80 sheets
Scanned Data sorted copies are
nd
printed
Copy
1
1
Place one Original
at a Time or up to 50 ∗
sheets (20 lb)
∗
30 sheets/Legal,
Ledger
1
Place the first 50 sheets
of originals on the ADF
Tray.
2
Reduction/
Enlargement
only
2
Reduction/
Enlargement
only
2
copy function.
1 and 2 2.