Konica Minolta Bizhub C360 User Manual page 140

6
Settings
[Half-Fold Specification]
[Print Jobs During Copy
Operation]
[Automatic Image Rotation]
[Finishing Program]
[Card Shot Settings]
Factory default
[Auto Booklet ON when
Fold & Staple]
[Auto Zoom for Com-
bine/Booklet]
[Auto Sort/Group Selec-
tion]
[Default Copy Settings]
[When AMS Direction is In-
correct]
[Separate Scan Output
Method]
[Enlargement Rotation]
[Auto Zoom (Platen)]
[Auto Zoom (ADF)]
[Specify Default Tray when
APS Off]
[Select Tray for Insert
Sheet]
[Half-Fold Specification]
[Print Jobs During Copy
Operation]
[Automatic Image Rotation]
[Finishing Program]
[Card Shot Settings]
6-10
Specify whether to apply Half-Fold together for all pages or for each page
when handling a job containing multiple pages.
When Half-Hold is selected with Booklet, all pages are half-held together
even if [One Sheet at a Time] is selected.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-40.
Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is available if the Finisher FS-527 or Finisher FS-529 is installed.
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-40.
[Auto Select Booklet]
[Auto Display Zoom Ratio]
[Yes]
[Factory Default]
[Print]
[Page Print]
[Allow]
[OFF]
[ON]
[Tray Before APS ON]
[Tray 2]
[Multiple Sheets]
[Accept]
[When Auto Paper/Auto Zoom is set]
[ON]
- [Layout]: [Top/Bottom]
- [Zoom]: [Full Size]
[Copier Settings]
bizhub C360/C280/C220 (Version 3)
6.3