Pioneer AVH-P7850DVD Installation Manual page 9

WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS
LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
Connection method
1. Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Blue/white
To system control terminal of the power
amp or Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
See the section "When
Violet/white
connecting with a rear view
camera".
Power supply side
Ground side
Fuse (4 A)
Fuse (10 A)
Fuse (10 A)
Black (ground)
To vehicle (metal) body.
2. Clamp firmly with
needle-nosed
pliers.
Parking brake
switch
Yellow
After making all other connections to this unit,
connect this to the positive + terminal of the
battery.
CAUTION
Attach a 20A fuse immediately prior to
the battery. Also, use heat resistant
battery cable with more than 5-square
millimeter sectional area.
Fig. 4
8