Jackson Conserver AXL Installation & Operation Manual page 53

OLD STYLE: If your unit uses items 5 and 6, it is the old style hood weldment. Items 3 thru 6 are used only with the old style Hood Weldment.
The hood will have the proper mounting holes in the rear door guides and in the hood itself.
NEW STYLE: If your unit does not use items 5 and 6, then it is the new style hood weldment. Items 12 thru 15 are used only with the new
style Hood Weldment. The hood will have two places on the back of the hood to attach the cantilever support bracket assembly shown above
to the right.
ITEM QTY DESCRIPTION
1 1 Hood Weldment, Conserver XL2 - Old Style
1 1 Hood Weldment, Conserver XL2 - New Style
1 1 Hood Weldment, Conserver AXL2
2 4 Door Guide
3 1 Door Guide, Left Rear
4 1 Door Guide, Right Rear
5 2 Arm Support Weldment
6 2 Arm Support Weldment Gasket
7* 1 Front Door Stop (Not Shown)
8* 1 Stiffener, Hood Support (Not Shown)
9 2 Manifold L-Bracket
10 1 Door Catch
11 1 Hood Stiffener
12* 2 Bracket, Cantilever Support
13* 6 Wear Button
14 1 Door Guide, Left Rear, New Style
15 1 Door Guide, Right Rear, New Style
SECTION 5: PARTS SECTION
CONSERVER XL2 HOOD ASSEMBLY
11 10
2 3
Conserver XL Series Technical Manual 7610-002-10-23
Issued: 11-28-2007 Revised: N/A
5
1
9
6
46
4
12, 13*
Mfg. No.
05700-002-21-67
05700-002-60-76
05700-003-25-05
05700-021-44-94
05700-021-33-16
05700-021-33-15
05700-011-43-52
05700-111-36-01
05700-021-60-27
05700-002-47-39
05700-011-34-63
05700-011-46-50
05700-002-08-24
09515-003-15-64
05700-011-88-01
05700-021-84-71
05700-021-84-70