Transfer Logs To Syslog Server; Admin Tools - Buffalo WAPS-APG600H User Manual

Chapter 3 Configuration

Transfer Logs to Syslog Server

This is used to set the transfer function by syslog protocol.
---> Admin Config > Transfer Logs to Syslog Server
Parameter
Log Transfer
Copy log to attached USB device

Admin Tools

This displays the status of Admin Tools.
---> Admin Config > Admin Tools
Meaning
Enable this to use the log information transfer function.
If used, the syslog server is set by an IP address.
Enable to transfer log information to a USB memory device
attached to the AirStation.
- 59 -