Buffalo WAPS-APG600H User Manual page 35

11n/a & 11n/g/b smart model
Hide thumbs Also See for WAPS-APG600H:
Table of Contents

Advertisement

Chapter 3 Configuration
Parameter
Radio
Band
Enable SSID#
SSID1 - SSID5
Auto Channel
Auto Channel Range
Channel
Meaning
Enables or disables the wireless LAN.
This is used to set the wireless operation mode.
To set manually, select "Manual".
In communication with devices that are set as WDS connection
devices, the transmission speed is determined automatically
regardless of the "Manual" setting.
Sets Enable or Disable for the SSIDs from SSID1 to SSID5 (maximum
of 5 SSIDs each for 11g and 11a).
Sets the VLAN IDs and SSIDs from SSID1 to SSID5 (maximum of 5
SSIDs each for 11g and 11a).
The SSID is the AirStation identification name on the wireless LAN.
When connecting from a wireless LAN device, this SSID value is
used to indicate the AirStation.
A roaming environment can be built by installing multiple
AirStations with the same SSID over a wide area.
The SSID can be set using 1 to 32 single-byte alphanumeric
characters and single-byte symbols. The SSID is case-sensitive.
The VLAN ID can be set to an integer value from 0 to 4094.
Note: To set SSID2 to SSID5, enable the numbers corresponding to
"Enable SSID#".
Sets Enable or Disable for the auto-channel.
When enabled, empty channels can be automatically detected.
Specifies the channel range used in the 2.4 GHz or 5 GHz band
wireless LAN.
Specifies the channel used in the 2.4 GHz or 5 GHz band wireless
LAN.
If there are any wireless devices using a nearby frequency in the
surrounding area, communication can be adversely affected. If the
communication speed is slow, trying changing the channel.
Note: If W53 (52, 56, 60, or 64 ch) or W56 (100, 104, 108, 112, 116, 120,
124, 128, 132, 136, or 140 ch) is selected, the DFS (Dynamic
Frequency Selection) function is automatically enabled to
prevent crosstalk with weather and flight control radar and similar
equipment. When this function is enabled, if the AirStation detects
crosstalk, wireless communication may be temporarily stopped for
about 1 minute to prevent interference with radar.
- 34 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Waps-ag300hWaps-ag300h

Table of Contents