Chapter 3 Configuration
Parameter
Status
Save/Restore Settings
This lets you save or restore the current settings of an AirStation on a computer.
---> Admin Config > Save/Restore Settings
Parameter
No file found
Meaning
If "Registered" is displayed, remote management mode by Admin
Tools is enabled. Certain parameters and content that can be set
from this interface may be partially restricted.
If "Unregistered" is displayed, remote management mode by Admin
Tools is not enabled.
Revoke registration
Click this button to cancel remote management mode in Admin
Tools.
Meaning
This is used to save the current AirStation settings to a
configuration file.
Also, the settings that were saved in the configuration file can be
restored.
The location where the configuration file is saved or restored from
can be selected from a computer accessing the AirStation setting
screen or a USB memory device connected to the AirStation.
- 60 -