Transfer Logs To Syslog Server; Admin Tools - Buffalo WAPS-APG600H User Manual

Transfer Logs to Syslog Server

Configure the transfer functionality by syslog protocol here.
Administration - Transfer Logs to Syslog Server
Transfer Logs
Copy Logs to Attached USB Device

Admin Tools

Displays the status of Admin Tools .
Administration - Admin Tools
Status
Policy Groups
Check to enable the log information transfer functionality. When
enabled, enter the IP address of the syslog server.
Check to enable transferring logs information to a USB memory device
attached to the AirStation.
If "Registered" is displayed, remote management mode by admin tools
is enabled. Certain parameters and content that can be set from this
interface may be partially restricted.
If "Unregistered" is displayed, remote management mode by admin tools
is not enabled.
Revoke registration
Click to cancel remote management mode in admin tools .
Displays the group of the managed parameters when the AirStation is in
the remote management mode.
53