Radius - Buffalo WAPS-APG600H User Manual

Chapter 3 Configuration
Parameter
Registered Access Point

RADIUS

This is used to set the RADIUS server used for wireless LAN device authentication and other
operations.
In the AirStation, IEEE802.11g and IEEE802.11a can each be registered to two (primary and
secondary) external RADIUS servers. When the primary and secondary servers are registered, if
a communication problem occurs in the primary server, the inquiry target can be automatically
switched to the secondary server for continuing the authentication process.
Notes: · The RADIUS server must be capable of being accessed from the management VLAN.
· Support is not provided for accounting. Also, authentication systems other than EAP are not
supported.
Meaning
This displays a list of the MAC addresses of access points connected
by WDS.
Edit
Click to edit the added access point information. This proceeds to
the edit screen.
Delete
This removes individual access point information that was added.
Delete All
This removes all access point information that was added.
- 48 -